Cost-effective CA DVB-S

Montage 2200: 1.Fully Dual DVB-S MPEG-2 compliant 2,CVBS, RGB video output 3,Conax CAS7.0 Embedded

New Model Montage 2200:

Features:

·Fully Dual DVB-S  MPEG-2 compliant.

·CVBS, RGB video output 

·Video outputs support for NTSC, PAL worldwide standards.

·DiSEqC 1.0/1.1/1.2/1.3(USALS) supported.

·9-Picture program preview mode

·Timer function supported.

·4:3/16:9 aspect ratio support through pan/scan or letter-box formats

·Easy-Installation Menu.

·Conax CAS7.0 Embedded

·The OTA (Over-To-Air) upgrade supported

Specification:

TUNER

- Input Frequency: 950~2150MHz

- Input Level: -65~-25 dBm

- Input Impedance: 75R

- LNB Power : Auto/14V/18V/OFF, Imax = 350mA

CHANNEL DECODING

- Waveform: QPSK

- Roll Off Factor: 0.35

- FEC: 1/2, 2/3, 3/4, 5/6, 7/8, Automatic

- Symbol Rate: 1.0~45 MS/s

VIDEO DECODING

- Format: Decodes MPEG-1(ISO/IEC 11172-2)or MPEG-2 MP@ML(ISO/IEC 13818-2) video bit-steam at maximum size of 720x576

- 4:3/16:9 aspect ratio support through pan/scan or letter-box formats

.

AUDIO DECODING

- Supports MPEG-1 and MPEG-2 Layer I/II audio decoding

- Supports sample rates of  16, 22.05, 24, 32, 44.1, 48kHz

- Single program encoded bit-stream output on S/PDIF port

PROCESSOR AND MEMORY

- CPU: M88CS2200

- Clock Frequency: 133MHz

- Flash Memory: 16M bit serial flash

- SDRAM: 64M bit

FRONT PANEL

- LED Display: 4 bit LED to indicate channel number and status

- Keys: Up, Down, Power

- IR Receiver: 38KHz

- Smart card reader: 1

REAR PANEL

- 1 x LNB Input

- 2 x Audio L/R (RCA)

- 1 x Video Signal (RCA)

- 1 x S/PDIF(RCA)

- 1 x RS-232 (9-pin D-sub male)

- 1 x TV Scart

- 1 x RF output

RCU

- Category: IR(Carrier 38KHz)

- Battery: 2x1.5V AAA

POWER

- Input Voltage: AC100~240V 10%, 50/60Hz

- Power Consumption: 20Wmax

AMBIENT

- Operation Temperature: 0~40°C

- Size: 220mm(W) x 135mm(D) x 40mm(H)

Cost-effective CA DVB-S